Anthem A2 power amp

anthem-a2
The Anthem A2 is a 225 watt 2-channel power amp
http://www.anthemav.com/products-current/type=amplifier/model=a2/page=overview

Some specs:
GENERAL
Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
THD+N (200 W into 8 Ω) 0.001% at 1 kHz, 0.03% at 20 kHz
POWER BANDWIDTH 10 Hz to 100 kHz
(+0 -3 dB, 225 W into 8 Ω)
FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB)
INPUT SENSITIVITY 1.5 Vrms in for 225 W out into 8 Ω
INPUT IMPEDANCE 10 kΩ (RCA), 15 kΩ (XLR)
S/N RATIO 120 dB, A-weighted (ref. 225 W)
CROSSTALK -78 dB at 1 kHz
SWITCHES
Front Panel Power (On/Off)
Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR)
POWER OUTPUT
(Continuous RMS, 20 Hz to 20 kHz, <0.1% THD)
Impedance 8Ω 4Ω 2Ω
# of Channels Driven 1 All 1 All 1 All
225 W 200 W 370 W 300 W 535 W 410 W*Special Test Conditions Required for 2 Ω
POWER CONSUMPTION 800 W
DIMENSIONS
Height 7-5/8 inches (19.4 cm) including feet
Width Faceplate 19-1/4 inches (49 cm),
Chassis 17-1/4 inches (43.8 cm)
Depth 13-1/2 inches (34.3 cm)
Weight (unpacked) 34 lb (15.5 kg)