Musical Fidelity Amplifiers

Musical Fidelity M6si Integrated Amplifier

http://www.musicalfidelity.com/products/m6series/m6si 
Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework.
The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.
M6si – Specifications
Amplifier
Power output: 220 Watts per channel into 8 Ohms
THD (+ noise): <0.007 % typical 20Hz – 20 kHz
Signal to Noise Ratio: >107dB ‘A’ – weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
Inputs
4x Line Level RCA
1x Line Level XLR Balanced
1x USB type ‘B’ connector – asynchronous data stream at up to 24-bit/96kHz
1 x switchable phono input
Trigger in
Phono Input
Sensitivity: 3mV nominal (MM), 0.4mV nominal (MC)
Signal / noise ratio: >84dB ‘A’-weighted
Input impedance: 47k Ohms (MM and MC)
Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
Outputs
Trigger out
General
Dimensions – WxHxD (mm): 440 x 125 x 400
Weight (unpacked / packed): 16.6 kg/ 21.3 kg

M5si Integrated Amp

http://www.musicalfidelity.com/products/m5series/m5si
M5si – Specifications
Amplifier
Power output: 150 Watts per channel into 8 Ohms
THD (+ noise):
Signal to Noise Ratio: >100dB ‘A’ – weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
Inputs
4x Line Level RCA
1x USB type ‘B’ connector – asynchronous data stream at up to 24-bit/96kHz
1 x MM phono input
Trigger in
Phono Input
Sensitivity: 3mV nominal (MM)
Signal / noise ratio: >70dB ‘A’-weighted
Input impedance: 50k Ohms (MM)
Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
Outputs
Trigger out
Fixed, line level output
Variable, preamp output
General
Dimensions – WxHxD (mm): 440 x 100 x 405
Weight (unpacked / packed): 14.6 kg/ 18.8 kg

M3si Integrated Amp

http://www.musicalfidelity.com/products/m3series/m3si
M3si – Specifications
Amplifier
Power output: 85 Watts per channel into 8 Ohms
THD(+ noise): <0.014 % typical, 20Hz to 20 kHz
Signal to Noise Ratio: >98dB ‘A’-weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
Inputs
4x Line Level RCA / Phono
1x USB type ‘B’ connector – Asynchronous data stream at up to 24-bit/96kHz
1x MM Phono input
Phono Input
Sensitivity (nominal): 3mV (suitable for cartridges giving 1.5mV or more including high output MC types)
Signal / noise ratio: >70dB ‘A’-weighted
Input impedance: 50k Ohms
Frequency response: RIAA/IEC ±1dB, 20Hz to 20 kHz
General
Dimensions – WxHxD (mm): 440 x 100 x 400
Weight (unpacked / packed): 9.2 kg/ 13 kg

Musical Fidelity M3i Integrated Amp

http://www.musicalfidelity.com/products/m3series/m3i
M3i – Specifications
Amplifier
Power output: 76 Watts per channel into 8 Ohms (19dBW)
THD(+ noise): <0.014 % typical, 20Hz to 20 kHz
Signal to Noise Ratio: >96dB ‘A’-weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
Inputs
6x Line Level RCA / Phono
General
Dimensions – WxHxD (mm): 440 x 100 x 400
Weight (unpacked / packed): 9.2 kg/ 13 kg