Goldring coming out with 3 new budget phono cartridges

Music Hall is also introducing three budget-priced Goldring cartridges, the prices of which were just announced: $75 for the Element 1 (red), $120 for the Element 2 (green) and $150 for the Element 3 (violet).
http://www.analogplanet.com/content/ces-2017-music-hall-debuts-299-mmf-13-plus-three-budget-goldring-cartridges#0B8wbamhpfQaHRBb.97

Clearaudio Concept MM V2 phono cartridge

mm-concept_v2
Clearaudio Concept MM V2 phono cartridge is about the only one they offer that I consider affordable or reasonable personally.
http://clearaudio.de/en/products/cartridges-mm-v2.php
FREQUENCY RESPONSE 20 Hz – 20 kHz
OUTPUT VOLTAGE (1 kHz, 5 cm/s): ∼ 3.3 mV
CHANNEL SEPARATION (1 kHz): > 20 dB
CHANNEL BALANCE (1 kHz): ≤ 2 dB
TRACKING ABILITY 80 μm
REC. TRACKING FORCE (recommended: 1.8 – 2.6 g): 2.2 g ± 0.3 g
COIL IMPEDANCE (1 kHz): 0.66 kOhm
COIL INDUCTANCE 0.42 H
LOAD RESISTANCE 47 kOhm
LOAD CAPACITANCE 100 pF
CANTILEVER Aluminium
TOTAL WEIGHT 8.4 gram
WARRANTY 2 years

Dynavector DV 10X5 MC phono cartridge

This is about as far as I would go personally in spending for a phono cartridge (especially a MC cart), it may even be $50 more than I would do, but I’m listing it just in case any readers out there are of a different mindset on it.

new10x5_400w
Dynavector DV 10X5 MC phono cartridge:
http://www.dynavector.com/products/cart/e_10x5.html
SPECIFICTIONS
Type High output moving coil cartridge with flux damper and softened magnetism
Output Voltage 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation 25 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 – 20,000Hz (± 2dB)
Compliance 12 x 10-6 cm/dyn
Tracking force 1.8 – 2.2 grams
DC resistance R=150 ohms
Recommended load
impedance >1K ohms
Cantilever 6mm length aluminium pipe
Stylus Elliptical
Weight 7.3 grams