Emotiva Stereo Preamps


XSP-1 DIFFERENTIAL REFERENCE™ PREAMP

https://emotiva.com/products/pres-and-pros/xsp-1

Excellent input and output flexibility: 2 sets of balanced inputs, 4 sets of unbalanced inputs, one set of balanced main outputs, and one set of unbalanced main outputs.
Support for both stereo subwoofers and a summed mono subwoofer.
Level control via a high resolution (.5dB/step) digitally controlled analog resistor network.
High performance phono preamp that supports both moving magnet and moving coil cartridges, with user-configurable cartridge loading for moving coil cartridges.
Full analog bass management with independent, individually configurable, Linkwitz-Riley 12 dB/octave high-pass and low-pass filters for the mains and subs.
Digital flexibility and convenience including precise repeatability on all settings, a smart mute function, turn on level limit, and a full function remote control.
True external processor loop.
Gold plated, solid brass machined RCA connectors and gold-plated XLR connectors.
Highly regulated and shielded toroidal power supply.
Informative, dimmable front panel VFD display shows level, status, and input selections.
Flexible trigger and control options.
Universal AC line voltage.
Line level Input: 2 pairs balanced; 4 pairs unbalanced
Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced
Processor Loop (line level) Input: 1 pair unbalanced
Input Impedance (line level) Input: 50k ohms
Phono Input (MM or MC): 1 pair unbalanced
Main Outputs: 1 pair balanced; 1 pair unbalanced
(Main outputs may be configured as flat or high-pass; high-pass is adjustable from 50 Hz to 250 Hz)
Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced
(Subwoofer outputs may be configured as flat or low-pass; low-pass is adjustable from 50 Hz to 250 Hz)
Processor Loop (line level) Output: 1 pair unbalanced
Minimum recommended load impedance: 600 ohms
Trigger Input and Output: 1 each
IR input and output: 1 each
Gain structure:
Nominal output level: 0 dBV (1 V)
Nominal gain (with Volume set to “0”): 1
Maximum gain: +12 dB
High-Frequency and Low-Frequency Trims:
HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz
HF trim (inflection point): 4 kHz
LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz
LF trim (inflection point): 200 Hz
Bass Management:
Crossover slopes (high-pass and low-pass): 12 dB / octave
Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz

Balanced Input to Balanced Output
S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB
Frequency response: 20 Hz to 20 kHz +/- 0.02 dB
THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004%
IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%
Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB

Unbalanced Input to Unbalanced Output
S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB
Frequency response: 20 Hz to 20 kHz +/- 0.015 dB
THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006%
IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%
Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB

Balanced Input to Unbalanced Output
S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB
Frequency response: 20 Hz to 20 kHz +/- 0.015 dB
THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005%
IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015%
Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB

Unbalanced Input to Balanced Output
S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB
Frequency response: 20 Hz to 20 kHz +/- 0.017 dB
THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003%
IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007%
Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB

Phono (Moving Coil; phono in to balanced out)
Gain (1 kHz, Volume at 0): approximately 60 dB
Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm
S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB
Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB
THD (total harmonic distortion, ref 1.0 mV): < 0.008%
IMD (intermodulation distortion, SMPTE method: < 0.15 %
Crosstalk: < 65 dB

Phono (Moving Magnet; phono in to balanced out)
Gain (1 kHz, Volume at 0): approximately 40 dB
Input impedance: 47k Ohms
S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB
Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 dB
THD (total harmonic distortion, ref 10 mV): < 0.001%
IMD (intermodulation distortion, SMPTE method: < 0.05%
Crosstalk: < 80 dB
Power Requirements:
115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
Power consumption (On): 32 watts
Power consumption (Standby): <1 watt
Dimensions: 17” wide x 6” high x 16.5” deep (includes feet and terminals).

(Next page PT-100 STEREO PREAMPLIFIER/DAC/TUNER)

Emotiva Amplifiers


XPA-1 DIFFERENTIAL REFERENCE CLASS A/AB MONOBLOCK POWER AMPLIFIER
 https://emotiva.com/products/amplifiers/xpa-1
Fully discrete, fully balanced, Differential Reference™ design
Switchable Class A and Class A/B operating modes
Massive, high current toroidal power supply
Advanced microprocessor operating system which protects the amplifier from all fault conditions.
Balanced and unbalanced inputs.
Trigger input and output.
Precision blue LED power meter with switchable modes, dimmable or defeatable.
Machined, gold plated, unbalanced RCA input .
Heavy duty, gold plated, clear jacketed audiophile speaker binding posts.
Soft-touch power switch.
Solid milled aluminum faceplate.
Automatic 120/230 AC voltage detection and switching
Topology: fully balanced, fully discrete, quad differential, ultra high current, short signal path selectable Class A/AB
Number of channels: 1
Power output (0.1% THD):
1,000 watts RMS @ 4 ohms
600 watts RMS @ 8 ohms
Rated power bandwidth: 20 Hz – 20 kHz +/- 0.07dB
Minimum Recommended Load: 4 ohms
Frequency response: (-1 dB): 10Hz to 80kHz
THD+N: <0.01%
Signal to Noise Ratio:
1 watt: > 89 dB
Full power: > 117 dB
Damping Factor: >500 into 8 ohms
Power Supply: 1,200VA toroidal transformer, 120,000uF filter capacitance
Gain: 29 dB
Input Impedance:
33 kohms (balanced)
23.5 kohms (unbalanced)
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50/60 Hz (automatically switched)
Size:
unboxed: 17” wide x 7 3/4” high x 19” deep
Weight: 73 lbs

(Next page XPA Gen3 MODULAR AMPLIFIER SYSTEM)

Emotiva Phono Preamps


XPS-1 HIGH PERFORMANCE PHONO PREAMP
https://emotiva.com/products/pres-and-pros/xps-1
Precise equalization to the standard RIAA curve (within +/- 0.25 dB).
Support for both Moving Magnet (MM) and Moving Coil (MC) cartridges.
User selectable termination impedance for Moving Coil cartridges.
Exceptional signal-to-noise ratio and very low distortion.
Sophisticated multi-stage power supply for superior noise performance.
All metal case for ruggedness and excellent immunity from noise and interference.
Gold plated solid brass input connectors, output connectors, and ground terminal.
Input Impedance:
MM: 47k Ohms
MC: user selectable between 47, 100, 470, 1k Ohms
Gain:
MM: 40 dB
MC: 60 dB
Frequency Response:
MM: RIAA + / – 0.12 dB, 20 Hz – 20 kHz
MC: RIAA + / – 0.25 dB, 20 Hz – 20 kHz
Signal to Noise Ratio (S/N; A weighted):
MM: > 96 dB
MC: > 79 dB
THD:
MM: <0.0075 % @ 1 kHz; < 0.02%, 20 Hz – 20 kHz
MC: <0.006 % @ 1 kHz; < 0.05%, 20 Hz – 20 kHz

(Next page SP-1)